In order to prevent situations and ensure that the laboratory carries out the work accurately and efficiently when we build our laboratory, it is important to anticipate contingencies and always take into account design, materials, and accessories. Don't forget: the laboratory flooring requires special attention, it is required to meet some regulations. In this article we will talk about good laboratory practices that must be taken into account when installing floors and the best laboratory flooring solutions.

Construction Regulations For Laboratory Flooring

The laboratory is a very rigorous place. In such a workplace, it must be kept clean and tidy. Both the walls and the floor must be spotless, and the people entering the laboratory must also be kept clean. This is conducive to the accuracy of experimental results.

Common Regulations

The floor suitable for use in laboratories must be smooth, easy to clean, with rounded corners in baseboards (sanitary base), free of protrusions at its junction with the walls and with sealed joints. The ideal coating should be at least 2mm thick and homogeneous, so that wear does not expose a different material to the surface. Light colors are recommended to facilitate cleaning.

Hygienic Requirements

Professional laboratories have very high requirements for internal hygiene, because dust will have a non-negligible impact on the conduct of experiments and results. Especially in chemical or biological laboratories, a little bit of dust may cause product pollution, so it also puts high requirements on interior decoration materials.

Functional Requirements

If it is a laboratory involving electronics or a laboratory with precision instruments, static electricity is not allowed in the room. Because even a little bit of static electricity may cause interference to the instrument, or even burn out fine electronic components.

Appearance Requirements

In such a highly professional laboratory, the appearance is the second requirement. At the same time, the decoration of the laboratory will not emphasize the beautiful and fashionable or warm effect, but will show the characteristics of professionalism. In addition, some laboratories may choose a color that is not resistant to dirt, in order to be able to find the ground pollution in time so that they can be dealt with in time.

Best Laboratory Floor Solutions

In cases of renovation or remodeling, it is necessary to make sure that each area has:

• Completely new floors, especially in buildings that were previously dedicated to other uses.

• Floors or coatings in one piece, without additions, joints, assemblies. Any indentation could cause leakage of dangerous substances.

The Most Recommended Floor Materials For Laboratory:

• Huiya Heat Sealed ESD Vinyl Flooring. They are durable and traffic resistant, permanent anti-static, fire retardant, chemical resistant, stable to temperature changes.

• Concrete Slab (concrete) With Epoxy Coating. It has high resistance to heavy traffic, chemical resistance and guarantees zero leaks.

• Raised Floor With Anti-Static PVC Surface Finish. These Anti Static Raised Floors are easy to clean, durable, antistatic or electrostatic conductive, traffic resistant, do not require special maintenance and are easy to install. They are inexpensive and offer a wide variety of colors and finishes.

Good Laboratory Floor Should Meet The Below Performance:

• It should always be kept in mind that the material must cover perfectly from wall to wall, throughout the laboratory area.

• The edges must be protected by moldings.

• Floors should be easy to clean and, if possible, should be non-slip, to prevent people from slipping.

• Advances in technology allow us to have safe floors, with fun colors and highly aesthetic finishes.

• In fact, security is not synonymous with ugly and dark design. 

• These flooring requirements are primarily for chemical, food, pharmaceutical, and clinical laboratories, but they also apply to all types of laboratories due to their cost, maintenance, and durability characteristics.