Tips on raised floor systems and How to manage office gound cables

How to Manage Office Ground Cables?

　　Today, it’s the age of Internet technologies. Everywhere Internet has assumed a significant place. For this, proper cable management is essential to ensure the optimal function of the organization as a whole. what methods to manage cables in the office?

Why Office ground have many cables?

An office even though small will have the minimum set-up such data (internet), phone and monitoring systems. If the building is big, it's likely to have more complex IP-related audio-visual systems along with IP-rated automation systems meant for monitoring and controlling HVAC, management of energy, wind and shade control, lighting, digital signage. Further, it can also have an interface with security systems including video surveillance and aces control systems.

DIG HOLE SYSTEMS

Self-levelling mortar. DIG Hole to hide cables and infill cement. The cables should be kept underground by keeping them covered with proper protection under the self-living mortar. By this, it will lead to proper protection to the cables as well as to avoid potential electric shock. Further, it will make the surroundings neat.

This is to be done by digging a deep hole in the earth. The hole should be properly infilled and made uniform. This will make it easy to store and the cables.

The dig hole system involves digging the ground on the sidewalk. If there is no sidewalk or it's too narrow, you need to check for alternate options. The objective is to keep the cables at the depth of soil as recommended by standard and restoring practices.

ADVANTAGES OF DIG HOLE SYSTEMS

The advantage of the dig hole method is that cables are least derated thanks to enough heat dissipation. However, when it comes to the performance of the cables, the dig hole method imparts the least protection. Further, if the area is rat/infested, it's likely to cause issues because of their widespread destruction.

The whole process involves burying the cables under a concrete casement on all sides in the channel through which the cables run. In this method, there is maximum security to the cables from physical damage to the other cables. Heat despoliation is allowed.

And, if the self-telling mortar is used, it will help you a lot.

Another method that involves digging a hole is semi-direct burial. The difference with dig hole and the semi-direct burial method is that in the latter, the cables are installed through flexible HDPE conduits. These conduits boost protection from physical damage to the cable. It is also easy to replace the damaged cables or add news through just pulling through hand-hole or manhole covers at either end.

　　However, the cost of the construction including material, labor and the cost of cables makes it expensive. However, note that heat dissipation is lower because of the conduits.

Raised Floor Systems

　　A raised floor system is one that is of less than six inches in height. The purpose of these floors is to organize conduits, wires, and cables.

　　Raised floors enable under floor cable management as well as airflow. Raised floors are widely employed in institutional and industrial settings.

Compare Dig Hole and Raised Floor Systems on Cable Mamagment

Compare about DIG Hole and install Raised Floor Systems,Between dig hole and raised floor systems of cable management, each of them shows there are certain benefits that are obvious.

Each of them has benefits. Therefore, it makes sense to make a comparison on the basis o of easy installation, price and easy installation, durability, etc. are worth consideration.

Install time

DIG Hole

Dig hole method is great for its durability, protecting the cables, and making the surrounding look neat. Yet, the issue with the dig hole method is that it’s long and arduously process. You may need to hire expert personnel who could do the job in a much better way. The process is time consuming because of the mortar has to become dry enough. Besides once it’s set, it needs to be watered for a week so. All this makes the building for the dig hole making, for example, an office raised floor.

Raised Floor

On the other hand, Raised Floor Systems are simple and elevated structures. It comprises the main floor stabilized on a solid concrete slab.

The floor is made of panels on a grid held by adjustable vertical pedestals. The pedestals are fixed to the subfloor via adhesives or mechanical fixings.

Install time is less as compared to the dig hole method. This, you can ensure if you read-made concrete slabs for the purpose. If you don't opt for this, you can take panels measuring 2' x 2' size and the core clad in aluminum or steel. As the panels are compatible with different flooring finish such as linoleum Vinyl, rubber laminate, stone, carpet or ceramic tiles, they are suitable for flooring.

Price

DIG Hole to hide cables and infill cement is higher than that of raised floor systems. This is because it involves making the channels properly embedded with the right material. The whole process required expert handling. Further, once done, it needs to be watered for a few days to make it set properly and gain strength. All this increases the cumulative expenditure for the project.

On the other hand, the expenses that you need to bear for a raised floor system is comparatively lower.

The probable cost of the raised floor system hovers between $20 to $25 per square feet. It’s lower than the dig hole cable management system. On the other hand, the work cost per unit in the dig hole system is much more. As such, you should be careful while choosing the type of cable management system.

Control Surface flatness

The quality of the slab's flatness is in terms of the flatness expressed by the number FL and FF. Together there are F-numbers.Dig hole Quality cable management entails a good amount of flatness on the floor as well as the other parts of the body.. However, they are not that good.

Raised Floor Systems can adjust and control flatness as compared to the dig hole system. By this,

Conclusion

These conditions such as the quality, cost, maintenance and ease of installation are the important consideration in deciding to choose the right sort of things for cable management. Cable management may seem simple. Yet it needs to be handled and properly following diverse protective methods and tools. By this, the whole system will work in a coherent and consistent manner. And, following such strategy, you can help boost the productivity of the organization.